home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 3 / Cream of the Crop 3.iso / comm / ter12b.zip / TER12B._XE / MANUAL.EXE / MAINCONF.HLP < prev    next >
Text File  |  1993-12-01  |  9KB  |  257 lines

  1.  
  2.           ^t-=>  T E R M I N A T E    C O N F I G U R A T I O N  <=-^n
  3.  
  4.  Setting up Terminate is the easiest thing in the world. All options and
  5.  features are already set to give best performance - all you should do is to
  6.  adjust the few things you would like to function in ways other than
  7.  standard. Remember: If you do not understand something - then leave it alone
  8.  and do not change it!
  9.  
  10.  If you make some kind of mistake and your machine hangs, because of a wrong
  11.  device or something like that, you can start Terminate with the ^h/CONFIG^n
  12.  parameter. This will only access the configuration and then exit Terminate
  13.  again, without initializing the comport or anything.
  14.  
  15.                   ^bRead below for all commandline switches.^n
  16.  
  17.                      ^m╒══╡^t Change configuration ^m╞╕
  18.                      │ ^nScreen and colors        ^m│
  19.                      │^r Communications setup     ^m│
  20.                      │ ^nGeneral options          ^m│
  21.                      │ ^nToggles                  ^m│
  22.                      │ ^nModem and dialing        ^m│
  23.                      │ ^nFilenames and paths      ^m│
  24.                      │ ^nProtocol options         ^m│
  25.                      │ ^nEmulation/keyboard setup ^m│
  26.                      │ ^nHost settings            ^m│
  27.                      │ ^nLogin strings/scripts    ^m│
  28.                      │ ^nUsers/IEMSI              ^m│
  29.                      │ ^nPoint system             ^m│
  30.                      │ ^nCost management          ^m│
  31.                      │ ^nRegistration info        ^m│
  32.                      │ ^nWrite setup to disk      ^m│
  33.                      ╘══════════════════════════╛^n
  34.  
  35.  
  36.  ^hScreen and colors^n
  37.  
  38.   Here you can setup all screen related options.
  39.   Colours, windows, videomode, codepage, etc.
  40.  
  41.  ^hCommunications setup^n
  42.  
  43.   One of the most important menus. Setting up your serial connection is
  44.   actually the first thing you always should set up in a terminal program,
  45.   so that communication is fully functional and no errors occur.
  46.  
  47.  ^hGeneral options^n
  48.  
  49.   Set up Terminate exactly as you like it and define external programs that
  50.   can be called by pressing Ctrl+Shift F-keys.
  51.  
  52.  ^hToggles^n
  53.  
  54.   Toggles that can be turned on or off
  55.  
  56.  ^hModem and dialing^n
  57.  
  58.   After setting up the device you should now configure your modem to give
  59.   best performance. Many popular modems already appear in the picklist which
  60.   is continually being expanded.
  61.  
  62.  ^hFilenames and paths^n
  63.  
  64.   Define Download/Upload directory, external editor / lister, etc.
  65.   Default files to load when starting Terminate.
  66.  
  67.  ^hProtocol options^n
  68.  
  69.   Setting up internal and external protocols. Protocols are used for
  70.   transfering files between your system and other systems. Most used is
  71.   Zmodem. As well as being extremely efficient and starting a download
  72.   automatically, it can also recover a file not fully transfered. If the
  73.   connection was lost it can `pick up' again where transmission ceased and
  74.   continue where it left off without having to send the whole file again.
  75.  
  76.  ^hEmulation setup^n
  77.  
  78.   How Terminate should react to incoming characters. ANSI is one of the most
  79.   used emulations in the world, because it is simple. If you have chosen ANSI
  80.   and Terminate gets a sequence ESC2J (ESC=#27) then the screen will be
  81.   cleared. Terminate will default to using AVATAR with ANSI fallback - that
  82.   means it will understand both AVATAR and ANSI control codes at the same
  83.   time and this should be the preferred setting.
  84.  
  85.  ^hHost settings^n
  86.  
  87.   Host mode means that you set up Terminate to handle incoming calls and
  88.   allow specific users to logon to your computer.
  89.  
  90.  ^hLogin strings/scripts^n
  91.  
  92.   Instead of having complicated scripts that have to be compiled, Terminate
  93.   has a lot of built-in mini-scripts, which should log you on to almost every
  94.   normal BBS system. Subsequent versions will additionally have a
  95.   comprehensive and sophisticated script language (currently in beta test).
  96.   You can define in Strings all possible questions you want Terminate to
  97.   recognise like 'WHAT IS YOUR NAME','PASSWORD', etc.
  98.  
  99.  ^hUsers/IEMSI^n
  100.  
  101.   Define 10 different users. Each can be used for dialling a system, settings
  102.   for a user that calls the host mode or when you use the point system.
  103.  
  104.  ^hPoint system^n
  105.  
  106.   All settings for the fido point system allowing you to send/receive mail
  107.   and files.
  108.  
  109.  ^hCost management^n
  110.  
  111.   Allows you to calculate very exactly how much you spend, when calling
  112.   other systems.
  113.  
  114.  ^hRegistration info^n
  115.  
  116.   If this is the PROFESSIONAL version, check that your personal details are
  117.   correctly embedded.
  118.   Otherwise, this menu option will show you how you can quickly upgrade your
  119.   copy to PROFESSIONAL standard...
  120.  
  121.  ^hWrite setup to disk^n
  122.  
  123.   If Autosave config is ON in toggles, then the configuration will be written
  124.   when you leave the configuration menu, so you will not lose your settings
  125.   even if your machine hangs somewhere in an external program.
  126.  
  127.                   ^bC O M M A N D L I N E    S W I T C H E S^n
  128.  
  129.  ^h/CONFIG^n
  130.  
  131.   Only configures the .CFG file then exits again without initializing
  132.   anything at all.
  133.  
  134.  ^h/F^n
  135.  
  136.   Only starts up the filemanager, then exits again.
  137.  
  138.  ^h/HOST^n
  139.  
  140.   Start Terminate normally, then enter hostmode. This could be used in an
  141.   AUTOEXEC.BAT if you want to start in hostmode when accidentally rebooted
  142.   by some external program called while in hostmode.
  143.   If you call Terminate from a mailer, like Portal of Power, you should also
  144.   use the ^h/LOGIN^n switch, which will login a user, then exit hostmode
  145.   and Terminate. Commandline for mailer: ^hTERMINAT /HOST /LOGIN^n
  146.  
  147.  ^h/POINT^n
  148.  
  149.   Startup directly in point system, then exit to DOS when ESC is pressed.
  150.  
  151.  ^h/C:filename.ext^n
  152.  
  153.   Use alternate configuration file. You can also use here environment
  154.   variables in the filename, that will be replaced when opening the file.
  155.   (Network:/C:TERMINA%NET%.CFG)
  156.  
  157.  ^h/NOCARD^n
  158.  
  159.   Do not test or use any soundcards. (Maybe your machine would hang if this
  160.   was not turned off if you have no card. But this could also be turned off
  161.   when running windows, otherwise windows would say something like `device
  162.   already in use.)
  163.  
  164.  ^h/SKIP^n
  165.  
  166.   Skip systeminfo tests, PS/2 test. Again this takes microseconds to check,
  167.   and should only be turned off if you have problems with your machine
  168.   hanging when starting Terminate.
  169.  
  170.  ^h/DISK^n
  171.  
  172.   Force the overlay file to stay on disk. If you have a fast harddisk, you
  173.   don't need to load the overlays into memory, but it will, of course,
  174.   improve the speed of the menus.
  175.  
  176.  ^h/BUF:xxx^n
  177.  
  178.   If you do not load the overlays into memory, then you could increase the
  179.   overlay buffer, but this will grab normal low memory. The xxx value is how
  180.   many kilobytes to add to the previous buffer. The buffer can never be lower
  181.   than the smallest overlay file.
  182.  
  183.  ^h/NOXMS^n
  184.  
  185.   Terminate will always try XMS first because it is faster than EMS.
  186.   But if you, for some reason, never want Terminate to try XMS or want to
  187.   force Terminate into using EMS memory, you can use this switch.
  188.  
  189.  ^h/DIAL:xxx^n
  190.  
  191.   After startup, dial this number from phonebook and connect.
  192.  
  193.  ^h/BOSS[:x]^n
  194.  
  195.   Call Boss and send/receive mail/files. The x is which Boss to call, if
  196.   /BOSS or /BOSS:0, then Terminate will dial all Boss's that have the
  197.   autodial enabled.
  198.  
  199.  ^h/CALL:node/name^n
  200.  
  201.   Search nodelist for nodenumber or search string and call the first match
  202.   found.
  203.  
  204.  ^h/FIX^n
  205.  
  206.   Search/Update BIOS data area for serial ports. Will save the normal values
  207.   for the COM-ports into low memory and the bios equipment flag so it would
  208.   look like you have 4 COM-ports. Terminate does not need this but some
  209.   external utilties might.
  210.  
  211.  ^h/SCRLEN:xxx /SCRCOL:xxx^n
  212.  
  213.   If you are using the custom videomode or a videomode that Terminate cannot
  214.   detect, you will have problems with the screen size. So these parameters
  215.   allow you to force a screen size. Please do not set the size bigger than
  216.   the screen, because it could give unpredictable results.
  217.  
  218.  ^h/DEVICE:x^n
  219.  
  220.   Force a Terminate device at startup
  221.  
  222.  ^h/PORT:x^n
  223.  
  224.   Force a COM-port at startup
  225.  
  226.  ^h/BAUD:x^n
  227.  
  228.   Force a baudrate at startup
  229.  
  230.  ^h/TASK:x^n
  231.  
  232.   If Terminate cannot detect the multitasker for some reason, you can
  233.   force Terminate to think it is using a multitasker, which means it
  234.   will release timeslices calling the routine for that multitasker.
  235.  
  236.    1 = OS/2
  237.    2 = Windows
  238.    3 = DESQview
  239.    4 = TaskView
  240.    5 = TopView
  241.    6 = DoubleDos
  242.    7 = Virtual
  243.  
  244.  ^h/MODE:x^n
  245.  
  246.   Force videomode 0=Mono,1=CGA,2=EGA,3=MCGA,4=VGA
  247.   If you use the /MODE Terminate will not try to detect the videoadapter,
  248.   but assume you are right.
  249.  
  250.  ^h/UPG^n
  251.  
  252.   Will generate an UPGRADE.CFG with all default values. This file is used
  253.   when upgrading from old versions, but you can also use it for testing
  254.   and start Terminate with TERMINAT /C:UPGRADE.CFG
  255.  
  256.  
  257.